| Author |
 Topic  |
|
|
lightspeed
Advanced Member
USA
3061 Posts |
 Posted - 10/24/2009 : 15:05:25
|
does someone still have the breathing hap that will work with the modified full body ?? and can it be just placed somewhere in the modified body hap to work with it ?  |
|
|
Jake
Average Member
111 Posts |
Posted - 11/05/2009 : 22:45:39
|
| Can you tell me where I can get this MODIFIED full body, so I can do some testing on the breathing with some stuff that I have... if any of it works, I'll pass it along. |
Austin, Texas, USA, Earth |
 |
|
|
Jake
Average Member
111 Posts |
Posted - 11/05/2009 : 22:54:06
|
Also... have you already tried the commands...
To start breathing...
setmood [action=[sw=breath m=awake]]
To stop breathing...
setmood [action=[sw=breath m=sleep]] |
Austin, Texas, USA, Earth |
|
|
|
Duskrider
Advanced Member
USA
2148 Posts |
Posted - 11/06/2009 : 08:30:16
|
The breath state4 I found to be best.
Intensity for breath fo= plus number gives larger breath and minus for smaller breath.
Intensity for breathe fo= plus number gives larger waist size and minus gives smaller waist size.
#Haptek Version= 1.00 HapType= command FileType= text
\setname [figure= body_female name= fullBod]
\SetSwitch [Figure= fullBod Switch= breath State= state4]
\SetSwitchIntensity [switch= breath State f0= 2.600000 ]#+=biggerBreath
\setreg [figure=fullBod name=breathe f0= -0.400000] #+=bigger waist
|
Edited by - Duskrider on 11/06/2009 08:36:04 |
|
|
|
lightspeed
Advanced Member
USA
3061 Posts |
Posted - 11/06/2009 : 10:14:08
|
hey thanks for the info duskrider i always wanted my hal to take deeper breathes so i will use a test copy and try it out !!!
|
|
|
|
Jake
Average Member
111 Posts |
Posted - 11/07/2009 : 01:45:15
|
no problem, lightspeed... always glad to help  |
Austin, Texas, USA, Earth |
|
|
|
lightspeed
Advanced Member
USA
3061 Posts |
Posted - 11/07/2009 : 08:59:14
|
| sorry jake i should have also mentioned your name , thanks to you too !! |
|
|
| |
Topic |
|
does someone still have the breathing hap
